How To Get Sliding Glass Door Roller Repair For Hassle Free Working

A house that has a sliding patio door is worth a thousand words. Many home owners today will only consider buying a house if it has a sliding door leading towards the garden. It will make your room look bigger and is functional at the same time. They open up the house to the exterior and provide easy excess into and out of the house especially during parties. However, there is a negative side to everything and when it comes to sliding doors, many home owners find repair sliding glass door rollers to be a nightmare.

The biggest problem with sliding doors is that they get stuck often and you end up calling a repair man. Homeowners can easily learn how to fix sliding glass door rollers. All you need is an extra pair of hands, and the right tools.

Before you learn how to repair the doors you need to know the reason behind why they get stuck;

1. A fault in the gliding system
2. A problem with the hard ware
3. Dirt particles stuck inside the rollers

If the door seems to be too tight you can easily loosen it with a screwdriver. Get sliding glass door roller repair here, you can follow the following guidelines.

1. If the doors rollers have become brittle you can easily replace them. To remove them simply slid them out from either side using a screwdriver.  Remember to take a sample roller with you then you go to the hardware store.  To install them simply slid them in from each side of the sliding door.
2. Always keep the tracks clean and free of any debris. Use a brush to remove the dirt and then wipe the tracks using a damp cloth.
3. You can also use a lubricant to clear the tracks. Simply apply the lubricant along the tracks and on the sides of the doors. Allow for it to settle in. You can also use a lubricant spray to clean the rollers.  After ten minutes wipe the track clean with a rag.

Now that you have the sliding glass door repair job done the door should slid easily without any noise. However, if the problem is not solved ask a friend to help you lift the door out and then clean the track. The easiest way to clean the tack once the door has been removes is to suck out all the dirt and debris using a vacuum cleaner. You can then wipe the tracks clean with a damp cloth and dry them using another cloth which is dry of course.

Before you replace the door make sure to remove the rollers and spray some silicon spray on them. This will help keep them oiled for a longer time.  You can now put the rollers back on the track and push the door back onto the rollers. Your sliding door should be as good as new and not give you any more problems, at least for a few more months. Get free quotes online at www.doorwindowrepairs.com

Importance Of Sliding Glass Door Repair Kit For Proper Sliding Glass Door Repairs

Quite often at our homes people see that it is getting very hard to open the patio door that could once be operated without any problem whatsoever. It takes a huge amount of effort to make it move as compared to before. One major explanation of this situation could be that the rollers on the sliding door have become damaged. Under normal circumstances a sliding door can go on for 10 to 15 years but they can also get worn out prior to that time period.

Quite often in these circumstances it is a natural tendency of people to call for professional help. What people do not understand is that they if they can work on it on their own they can save a significant amount of money. This is where a sliding glass door repair kit can be of immense value.

In addition to a well equipped sliding glass door track repair kit what people need in these circumstances is some well-meaning advice as well as some decent information and a substantial amount of strength to pull the door out. Most of the patio doors that slide are made using aluminum and there are some that have been made from materials such as vinyl and wood.

Irrespective of the material with which they have been built the sliding patio doors normally using ball bearing rollers so that the door can be opened and closed with ease in both the directions. In case of some vinyl doors as well as the aluminum doors there are a couple of screws on both the sides that holds the door in the position that it is meant to be. Under the screws there is an open hole and its main purpose is to help with the adjustment of the screws above. This also helps in raising and lowering the roller.

In the wooden doors the number of such screws is double of what one will see in the other types of doors. This is because these doors have more weight. For more information on sliding glass door rail repair kit please look up www.doorwindowrepairs.com

How To Repair Sliding Glass Door Track | Efficient Tips To Repair Sliding Glass Door Track

The sliding doors are a modern look of the conventional doors that allow the sunlight to enter. If you have sliding doors at your home which are quite old, then you might have noticed that the doors often become hard to open. This is a more common problem in the case of the aluminum frame dual pane doors. In most of the cases, the aluminum units don’t use the stainless steel rollers.

So, the rollers become rusty and start to bind. So, if you find that opening your sliding door has become difficult or the door is making screeching noises while sliding¸ there is no requirement of replacing the door. You just have to repair sliding glass door track. Besides, there is no requirement of call a handyman too. Read the simple steps mentioned below and you will get to know how to repair sliding glass door rollers How to repair sliding glass door rollers easily and quickly.

• Lubricate the rollers if the roller is completely struck. If there is any debris in the sliding track, remove that, otherwise it can impede the movement of the door.

• Lift the bottom part of the door straight up in order to remove the bottom part of the rollers. Then pull down the door and pull away from the top tracks to release all the top rollers.

• Adjust the rollers in case the sliding glass door repairs strikes or wobbles. Check the small holes in your sliding door near the bottom and top rollers. On the basis of the design of your door, the holes can also be on the front or along the rim. Insert a screwdriver and turn the holes counterclockwise in order to expand the rollers if the door is loose. If the door sticks, then turn the screwdriver clockwise.

• Inspect and replace the rollers if you find them cracked, broken or worn out. In order to remove the rollers, take the screws out above the adjustment holes.

In order to get some more details related to the ways to fix sliding glass door track, you can visit www.doorwindowrepairs.com