How To Get Sliding Glass Door Roller Repair For Hassle Free Working

A house that has a sliding patio door is worth a thousand words. Many home owners today will only consider buying a house if it has a sliding door leading towards the garden. It will make your room look bigger and is functional at the same time. They open up the house to the exterior and provide easy excess into and out of the house especially during parties. However, there is a negative side to everything and when it comes to sliding doors, many home owners find repair sliding glass door rollers to be a nightmare.

The biggest problem with sliding doors is that they get stuck often and you end up calling a repair man. Homeowners can easily learn how to fix sliding glass door rollers. All you need is an extra pair of hands, and the right tools.

Before you learn how to repair the doors you need to know the reason behind why they get stuck;

1. A fault in the gliding system
2. A problem with the hard ware
3. Dirt particles stuck inside the rollers

If the door seems to be too tight you can easily loosen it with a screwdriver. Get sliding glass door roller repair here, you can follow the following guidelines.

1. If the doors rollers have become brittle you can easily replace them. To remove them simply slid them out from either side using a screwdriver.  Remember to take a sample roller with you then you go to the hardware store.  To install them simply slid them in from each side of the sliding door.
2. Always keep the tracks clean and free of any debris. Use a brush to remove the dirt and then wipe the tracks using a damp cloth.
3. You can also use a lubricant to clear the tracks. Simply apply the lubricant along the tracks and on the sides of the doors. Allow for it to settle in. You can also use a lubricant spray to clean the rollers.  After ten minutes wipe the track clean with a rag.

Now that you have the sliding glass door repair job done the door should slid easily without any noise. However, if the problem is not solved ask a friend to help you lift the door out and then clean the track. The easiest way to clean the tack once the door has been removes is to suck out all the dirt and debris using a vacuum cleaner. You can then wipe the tracks clean with a damp cloth and dry them using another cloth which is dry of course.

Before you replace the door make sure to remove the rollers and spray some silicon spray on them. This will help keep them oiled for a longer time.  You can now put the rollers back on the track and push the door back onto the rollers. Your sliding door should be as good as new and not give you any more problems, at least for a few more months. Get free quotes online at www.doorwindowrepairs.com