Monday, 16 December 2013

Sliding Glass Patio Door Repair - How To Repair Or Replace Glass, Roller

The sliding glass patio doors become quite hard to open as well as sticky while the tracks get dirty or the wheels are out of adjustment. Besides, if the sliding door is giving work out every time you are trying to open it, then it must be the rollers that are causing the troubles. This is the right time when you should go to the sliding glass patio door repair. Opening and repairing the patio glass sliding door is quite an easy job. So, you don’t have to call the professional every time.

 Get Free Sliding Glass Patio Door Repair Quotes Here!!
The rollers of these doors are mainly located on the lower part of the door and it offers the doors the ability to slide. But when these rollers become dirty or wear out, it becomes really difficult to open the door. Another thing is that often the rollers of the sliding glass patio doors become rusty as they are not made with the stainless steel. In this situation, you can get back the patio door is full working condition by opting for the sliding glass door repairs process.

Start the repair with a good cleaning. Scrub the grime and the caked dirt out of the track with soapy water and with a stiff brush. Even after doing that, the door doesn't slide smoothly, then adjust or shot the rollers.

The next step of sliding glass door repair is to find out the adjusting screws of the doors. Check whether one side of the screw has become lower than another side. If yes, then raise the screw until and unless the door looks even on the track. In case the door still sticks, then turn both the screws a quarter turn in order to raise the door.
If the door doesn’t glide smoothly, then remove it completely and check the rollers. Clean the rollers thoroughly and add a few drops of lubricant so that the rollers can spin freely. But in case the rollers are cracked, worn out or bent, remove and replace them with a brand new pair.

You can have more information about the sliding glass doors repair process by logging on to www.doorwindowrepairs.com

Thursday, 5 December 2013

How To Repair The Sliding Glass Patio Door | Tune-Up Gliding Of Sliding Glass Patio Door

The sliding glass doors are n well known feature in the rooms with the patios or decks because the full length glass panels of these doors offer a great outdoor to the rooms while offering too easy access to the outer part of the house. The sliding doors are mainly used for the pantries and closets and in some cases to conceal the furnaces and water heaters. 

The sliding door panels can be removed easily to get the complete access to the places which are behind these doors. You can keep the sliding doors on the track by following the simple sliding glass patio door repair and maintenance procedures.

  • Replace the rollers: The roller assemblies are quite visible in the bottom part of the door. Though these doors are mainly held in the place with a single screw, the door would be a little different and you need to find the screw to sliding glass patio door roller repair. So, in order to remove the rollers, remove the screw first. If they are damaged, then replace the assembly or the roller.
  • Remember one thing that exact replacement is necessary to ensure a smooth operation. Whether replacing the door you can be confused that whether the rollers or assemblies will be identical or not. To avoid confusion, take the accurate measurements and then purchase the new ones.  Then fit the rollers or assembly in the same manner into the frame and put all the fastening screws back.
  • Adjust the rollers: Adjust the sliding glass patio door rollers. Turn the adjustment screw by using a screwdriver until the door raises a little off the bottom sliding patio door repair track. The screw will push down the actual roller wheel in order to push up the door. Check whether the door is sliding freely or not. If there is any problem then adjust the roller until and unless the door is square with the frame.
After the task is complete, reinstall the door. Now you have completed the task of sliding glass door patio repair successfully and have set up new patio door rollers.

You can get more details regarding the slide glass door repair by visiting www.doorwindowrepairs.com

Sunday, 1 December 2013

All About Repair Sliding Glass Doors In USA | How To Repair Sliding Glass Door Rollers Efficiently

If the sliding glass door of your room is not moving properly or if it is falling off the track, then you can solve the problem quite easily by repairing the sliding glass door rollers. Over the time, the rollers may wear down or crack, mainly if the track becomes dirty.


It is because, the debris grinds down the rollers and it also digs into the roller track while the door passes over. But you can easily repair sliding glass door rollers by following some easy steps outlined below. Please have a look.

  • First and foremost, lubricate the rollers with the penetrating oil in case the door is stuck. Then remove the debris that is impeding the door’s movement.
  • Adjust the rollers in case the door sticks or wobbles while moving along the track. Check the holes near the top and base rollers. On the basis of the design of the doors, the adjustment holes can be along the edge or in front of the door. Insert a small screwdriver to every hole and then turn counterclockwise to expand the rollers. But turn the screwdriver clockwise in order to retract the rollers.
  • Raise the bottom part of the sliding door in a straight way to take out the bottom rollers from the track. Then pull down and pull away the door from the track to release the top rollers. Then put the door on a work bench or sturdy table to get a clear view of the rollers.
  • Then inspect and repair sliding glass doors rollers and also replace if there is any broken , worn out or cracked rollers. Remove the screws above the adjustment holes to take out the rollers. Don’t ever try to separate the glass from the door frame while pulling off the rollers.
  • Take out the mounting screw along the bottom and top part of the doorway in case the tracks show any signs of wear and damage. Then install the replacement tracks and tighten all the screws to hold all the new tracks in the right place.
To get more information about sliding glass door roller repair, you can visit www.doorwindowrepairs.com