Sliding Glass Patio Door Repair - How To Repair Or Replace Glass, Roller

The sliding glass patio doors become quite hard to open as well as sticky while the tracks get dirty or the wheels are out of adjustment. Besides, if the sliding door is giving work out every time you are trying to open it, then it must be the rollers that are causing the troubles. This is the right time when you should go to the sliding glass patio door repair. Opening and repairing the patio glass sliding door is quite an easy job. So, you don’t have to call the professional every time.

The rollers of these doors are mainly located on the lower part of the door and it offers the doors the ability to slide. But when these rollers become dirty or wear out, it becomes really difficult to open the door. Another thing is that often the rollers of the sliding glass patio doors become rusty as they are not made with the stainless steel. In this situation, you can get back the patio door is full working condition by opting for the sliding glass door repairs process.

Start the repair with a good cleaning. Scrub the grime and the caked dirt out of the track with soapy water and with a stiff brush. Even after doing that, the door doesn't slide smoothly, then adjust or shot the rollers.

The next step of sliding glass door repair is to find out the adjusting screws of the doors. Check whether one side of the screw has become lower than another side. If yes, then raise the screw until and unless the door looks even on the track. In case the door still sticks, then turn both the screws a quarter turn in order to raise the door.

If the door doesn’t glide smoothly, then remove it completely and check the rollers. Clean the rollers thoroughly and add a few drops of lubricant so that the rollers can spin freely. But in case the rollers are cracked, worn out or bent, remove and replace them with a brand new pair.

You can have more information about the sliding glass doors repair process by logging on to www.doorwindowrepairs.com